The proper maintenance of EPI industrial floors is essential to guarantee their functionality. Smart Floor Solutions sells high-quality cleaning products and scrubber driers. We included these as an example in our recommendation. You may order the products on www.smartfloorsolutions.nl.
Maintenance consists of three steps:
- Preventive measures to protect the floor
- Daily or weekly maintenance
- Periodic maintenance
To prevent scratching, scrapers or absorptive mats, e.g. Storax or Hamat, should be placed at all doors. These prevent the tracking of dirt into the building. We suggest the entrance solutions of Storax or Hamat.
Furniture floor protection
We recommend using suitable caps, glides or wheels under tables, chairs and office chairs to prevent scratching. More information can be found on epi.scratchnomore.nl.
We recommend maintaining the floor daily, depending on the degree of soiling. Use a Swiffer and a microfibre cloth for sweeping. Check for stains and remove these with a damp moist microfibre cloth.
Weekly and periodic maintenance
Sweeping does not remove all dirt. After sweeping and the removal of loose dirt, we recommend a moist, mechanical cleaning at least once a week.
Your industrial floor is supplied with an EPI top coating. This makes it easy to maintain. Due to the load and the related degree of soiling, the floor requires a thorough cleaning on a regular basis. This removes persistent dirt, which affects the floor’s appearance. Use Smart Floor Solutions Cleaner SP50 (mixing ratio 1:1 to 1:50) for this.
- Use a scrubber drier.
- Add Smart Floor Solutions SP50 to the clean water of the scrubber drier (mixing ratio 1:1 to 1:50).
- Scrub (do not vacuum) the floor with the scrubber drier, with a brush holder or a pad holder with a red pad and let it soak for approximately 10 minutes. Do not let it dry!
- Scrub the borders along the walls with a Doodlebug with a red pad.
- Then scrub and vacuum the floor again with the scrubber drier.
|Microfibre cloth||Sweeping system|
|Mopping||Moist, not too much water||Smart Floor Solutions MP50 Dosage
1:1 to 1:50
|Flat mopping system with microfibre|
|Scrubbing with red
pad and suck water (as needed and at least once every 2 weeks)
|Smart Floor Solutions SP50 Dosage
1:1 to 1:50
|Scrubber drier with red pad. Doodlebug with
red pad for
|Removal of rubber skid marks and heavy soiling||Spray soiled areas||Smart Floor Solutions SP50
|Red pad / damp moist cloth|